1、 Operation Guide
1. Check the cleaning tank to ensure that there is an appropriate amount of water in the tank (the water level should be at least 200mm above the transducer box).
2. Participate in an appropriate amount of cleaning agent according to the process requirements.
3. Suspend the power adjustment knob to position.
4. Close the power switch or plug the power cable into the power outlet.
5. Turn on the power switch, turn the "power adjustment" knob to the desired power value, and the ultrasonic cleaning machine will start working.
6. When stopping the homework, turn the "power adjustment" knob to the position and turn off the power switch.

2、 Maintenance and upkeep
1. If the device is not used for a long time, please drain the cleaning solution and clean the cleaning tank.
2. If the device is not used for a long time, please turn it on once a month according to the operation manual and work for half an hour.
3. If you have any skill problems, please let us know immediately.
3、 Warning 1: It is strictly prohibited to start the machine without water in the cleaning tank. 2. It is strictly prohibited to directly start with high power. 3. If the concentration of corrosive gases on site is high, please keep the ultrasonic system away from the cleaning tank as much as possible.
4. It is strictly prohibited to touch the electronic components inside the generator during the startup state and within 30 minutes of shutdown. The capacitors store high-voltage electrical energy.
Article source: Kaiping ultrasonic cleaning machine m.wfdai.cn/
04-01
Jiangmen Ultrasonic Cleaning Machine: What are the reasons for poor cleaning effect?
People originally use ultrasonic cleaning machines for convenience, and if ultrasonic cleaning is not clean, they will definitely feel sad in their hearts. What is the reason for the uncleanliness of
01-04
Cleaning process of ultrasonic cleaning machine
Cleaning processSelect a reasonable ultrasonic cleaning machine process based on the characteristics and contamination of the workpiece.4. How to choose between manual and semi-automaticManual operati
12-16
Instructions for using Jiangmen ultrasonic cleaning machine
1. Device ultrasonic cleaning machinePlease refer to the instruction manual of the ultrasonic cleaning machine to connect the temperature control sensor signal line, ultrasonic drive line, heater cont
12-10
Cavitation phenomenon of Jiangmen ultrasonic cleaning machine
Magical cavitation phenomenonWhen it comes to ultrasonic cleaning, some people may think that it is the use of high-frequency vibration of ultrasonic waves to destroy dust and dirt. Actually, ultrason